Inflatable kayak Igla-410

IGLA 410 hybrid inflatable kayak - comfortable, fast, light and manoeuvrable. A kayak you’ll want to take on your next trip. The hull’s refined
contours produce a sleek, hydrodynamic form which sees the IGLA slice through the water.

The IGLA is composed of two parts: a twin side-tube hull for a slim profile, and a removable high-pressure dropstitch floor to tension the
structure and improve rigidity and glide.


The side tubes are stacked one above the other with an internal partition. This arrangement not only improves longitudinal rigidity over a single side tube, but at 76cm wide, makes the IGLA one of the narrowest IKs in its class while
retaining generous internal space and excellent stability.


The IGLA 410 makes a fast and spacious solo kayak, but at 4.1m long has room for two with a second optional seat. At 4.1 metres, the IGLA is also suited to tandem day paddles with the optional second seat.
It’s a great way to enjoy the water with a friend.

The kayak has attachment points for mounting an optional rudder, including a pivot mount on the stern and foot pedal fittings on the floor). With a rudder you can compensate for oblique waves or winds pushing the kayak off track while maintaining a balanced padding
rhythm. Controlling the kayak with the pedals is intuitive while performing tight turns are merely a secondary benefit to rudders. Adjustable knee braces combined with footrests improve the connection with the
boat to improve paddling efficiency.

Allow 6-8 minutes to set up your IGLA. Unroll the boat and fit the loose floor into the hull then clip to the
hull → check the valves are in the open (down) position → inflate the sidetubes until the release valves hiss → inflate the floor → position the seat/s, clipping them to
the the sides and the floor.

The following fasteners are pre-installed on the Igla 410 kayak:
• loops on the sidetubes and floor for the solo seat
• fasteners for knee braces (in solo position)
• loops on the sides and bottom for the installation of the second seat
• for installing a solo/tandem deck; Velcro on the bow and stern and PVC D-ring on the sides
• on the stern for installing the rudder
• PVC base with straps for mounting footrests for solo paddling or rudder steering pedals
 
Rear volume: 150 litres with one
paddler or 80 litres with two paddlers
 
Features of the IGLA:
• unique design with inflatable frame and hydrodynamics matching hardshell kayaks
• dependable double floor protection
• versatility - paddle solo or with a friend
• capacious cargo capacity in the bow and stern
• elastic bungie cords for fixing loads on the stern
• carrying handles front and rear
• sturdy backpack with additional fittings for lashing on exterior loads

Standard equipment:
1 inflatable seat
1 pair of knee straps
1 toe supports
skeg alu
hand pump
repair kit 
backpack

Optional items:

spraydeck with one cockpit or with two cockpits
second seat
rudder kit


Number of seats
1 or 2
Colour
khaki-black, red-black, blue-black, grey-blue, grey-black
Kayak formation
Twin sidetube hybrid with removable dropstitch floor
Length
410 cm
Width
75 cm
Weight
16.5 kg
Weight (in set)
18.5 kg
Volume of luggage
150 litres
Load capacity
180 kg
Safety valves
on side tubes
Material
PVC 850 g/m2
Accessories
YKK

The review of the kayak Igla-410 after the first tests on the water from Chris Scott - on the blog inflatablekayaksandpackrafts.com